MACHINE ASSISTANCE
BARISTA MILK FROTHER
First use
How to prepare chocolate-based recipes
How to prepare cold recipes
How to prepare hot recipes
How to clean your device
First use
- Remove the lid, the whisk and the warning label on the whisk before use. Clean before the first use and after each use according to the cleaning instructions. Place the whisk in the jug.
- Fill jug according to level specified in the recipe instructions ( in the recipe book), To avoid and overflow, please note the highest "Max milk" level indicator is 250ml.
- Put the lid on the device. Make sure the jug is dry before you put it in the power base. Always make sure the whisk is in place before adding the ingredients.
- Chosse your recipe preparation by pressing the device button to start. Via the arrows, navigate left or right to select the desired recipe. There will be an animation on the screen during preparation and become steady on when the preparation is ready.
- Pour the required amount of cold fresh milk into the jug and cover with jug lid. Always use cold milk and fill the jug between MIN and MAX level markings. To avoid any scratches, use only the dedicated BARISTA spoon or a non metal spoon to collect the foam in the jug. For hot and cold milk froth, preparation takes approx. 80 sec. For hot milk, preparation takes approx. 150 sec. Preparation can be stopped at any time by pressing the button or removing the device from the power base. NOTE: Do not remove the jug during preparation. To stop operation at any time. press the START/STOP button once.
- Device turns off automatically after 3 minutes of non use and the display will shutdown. Press any arrows buttons to switch the device ON again, the display will start again. To turn off your device before the auto off, press and hold the main button for 5 seconds. NOTE: Never operate the appliance without the minimum level of liquid in the jug. For optimum frothing results, do not exceed the MAX indicator inside the jug. NOTE: when pouring your recipe, make sure to hold the whisk (or remove it) before pouring your recipe.
Step 1 of 6
First use
How to prepare chocolate-based recipes
- Remove the lid, the whisk and the warning label on the whisk before use. Clean before the first use and after each use according to the cleaning instructions. Place the whisk in the jug.
- Fill jug according to level specified in the recipe instructions ( in the recipe book), To avoid and overflow, please note the highest "Max milk" level indicator is 250ml.
- Chocolate Recipe: for chocolate based recipes, add the chocolate squares directly the device.
- Put the lid on the device. Make sure the jug is dry before you put it in the power base. Always make sure the whisk is in place before adding the ingrediens.
- Chosse your recipe preparation by pressing the device button to start. Via the arrows, navigate left or right to select the desired recipe. There will be an animation on the screen during preparation and become steady on when the preparation is ready.
- Pour the required amount of cold fresh milk into the jug and cover with jug lid. Always use cold milk and fill the jug between MIN and MAX level markings. To avoid any scratches, use only the dedicated BARISTA spoon or a non metal spoon to collect the foam in the jug. For hot and cold milk froth, preparation takes approx. 80 sec. For hot milk, preparation takes approx. 150 sec. Preparation can be stopped at any time by pressing the button or removing the device from the power base. NOTE: Do not remove the jug during preparation. To stop operation at any time. press the START/STOP button once.
- Device turns off automatically after 3 minutes of non use and the display will shutdown. Press any arrows buttons to switch the device ON again, the display will start again. To turn off your device before the auto off, press and hold the main button for 5 seconds. NOTE: Never operate the appliance without the minimum level of liquid in the jug. For optimum frothing results, do not exceed the MAX indicator inside the jug. NOTE: when pouring your recipe, make sure to hold the whisk (or remove it) before pouring your recipe.
Step 1 of 7
How to prepare chocolate-based recipes
How to prepare cold recipes
- Remove the lid, the whisk and the warning label on the whisk before use. Clean before the first use and after each use according to the cleaning instructions. Place the whisk in the jug.
- Fill jug according to level specified in the recipe instructions ( in the recipe book), To avoid and overflow, please note the highest "Max milk" level indicator is 250ml.
- Iced Recipes: For Iced recipes, add the ice bubes directly in the device.
- Put the lid on the device. Make sure the jug is dry before you put it in the power base. Always make sure the whisk is in place before adding the ingrediens.
- Chosse your recipe preparation by pressing the device button to start. Via the arrows, navigate left or right to select the desired recipe. There will be an animation on the screen during preparation and become steady on when the preparation is ready.
- Pour the required amount of cold fresh milk into the jug and cover with jug lid. Always use cold milk and fill the jug between MIN and MAX level markings. To avoid any scratches, use only the dedicated BARISTA spoon or a non metal spoon to collect the foam in the jug. For hot and cold milk froth, preparation takes approx. 80 sec. For hot milk, preparation takes approx. 150 sec. Preparation can be stopped at any time by pressing the button or removing the device from the power base. NOTE: Do not remove the jug during preparation. To stop operation at any time. press the START/STOP button once.
- Device turns off automatically after 3 minutes of non use and the display will shutdown. Press any arrows buttons to switch the device ON again, the display will start again. To turn off your device before the auto off, press and hold the main button for 5 seconds. NOTE: Never operate the appliance without the minimum level of liquid in the jug. For optimum frothing results, do not exceed the MAX indicator inside the jug. NOTE: when pouring your recipe, make sure to hold the whisk (or remove it) before pouring your recipe.
Step 1 of 7
How to prepare cold recipes
How to prepare hot recipes
- Remove the lid, the whisk and the warning label on the whisk before use. Clean before the first use and after each use according to the cleaning instructions. Place the whisk in the jug.
- Fill jug according to level specified in the recipe instructions ( in the recipe book), To avoid and overflow, please note the highest "Max milk" level indicator is 250ml.
- Put the lid on the device. Make sure the jug is dry before you put it in the power base. Always make sure the whisk is in place before adding the ingrediens.
- Chosse your recipe preparation by pressing the device button to start. Via the arrows, navigate left or right to select the desired recipe. There will be an animation on the screen during preparation and become steady on when the preparation is ready.
- Pour the required amount of cold fresh milk into the jug and cover with jug lid. Always use cold milk and fill the jug between MIN and MAX level markings. To avoid any scratches, use only the dedicated BARISTA spoon or a non metal spoon to collect the foam in the jug. For hot and cold milk froth, preparation takes approx. 80 sec. For hot milk, preparation takes approx. 150 sec. Preparation can be stopped at any time by pressing the button or removing the device from the power base. NOTE: Do not remove the jug during preparation. To stop operation at any time. press the START/STOP button once.
- Device turns off automatically after 3 minutes of non use and the display will shutdown. Press any arrows buttons to switch the device ON again, the display will start again. To turn off your device before the auto off, press and hold the main button for 5 seconds. NOTE: Never operate the appliance without the minimum level of liquid in the jug. For optimum frothing results, do not exceed the MAX indicator inside the jug. NOTE: when pouring your recipe, make sure to hold the whisk (or remove it) before pouring your recipe.
Step 1 of 6
How to prepare hot recipes
How to clean your device
- Unplug the power cord from the power outlet before cleaning.
- Remove the whisk. For an optimal cleaning, make sure to dissemble both part of the whisk.
- Wait for the jug to cool down and remove the milk jug from the power base.
- Remove silicon seal from lid. Dissemble all part of the whisk, by gently turning the upper whisk part to remove it.
- Hand washing: wash inner jug, seal, lid and whisk with detergent and rinse with warm/hot water. Do not use abrasive meterial that might damage the surface of the equipment. Make sure to remove the warning label before cleaning the whisk.
- Dishwashing: put all parts except the power base in the dishwasher at maximum 70° C.
- Dry all device parts with a fresh and clean towel, cloth or paper and reassemble all parts.
Step 1 of 7
How to clean your device
No lights on and no message
Check if device is plugged, press any button, if nothing happens call Nespresso.
Quality of milk froth not up to standard.
For optimal milk froth, use cold cow milk or semi skimmed cow milk at refrigerated temperature (about 4-6° C / 39.2-42.8 F). To guarantee hygiene conditions, use heat treated milk (pasteurized), refrigerated & freshly opened only, and 0% milk for Café viennois. Milk which has been frozen will not froth.
Be sure Barista and the whisk are clean.
It is highly recommended to not use special enriched milks, powdered reconstituted milks nor flavoured milks.
Milk overflows
Ensure that the jug is well placed on the power base.
Check correct position of the lid.
Quantity of milk has to be between MIN level and MAX level.
Displays message:
Device needs to be repaired, please call Nespresso and mention error code: E01 to E34, phone number available on Nespresso website.
Displays message:
Check if jug is present and in good position. If not replace jug in good position.
Check if whisk is present and in good position. If not place whisk with whisk disk well positioned in good position.
Displays message:
There is not or not enough milk inside jug.
Displays message:
Restart recipe, voltage detected as out of range.
Displays message:
Whisk or motor is blocked, preparation is to thick, please emplty, refill and restart.
Displays message:
Please unplug and plug again to reinitialise the device.
Displays message:
Whisk or motor is blocked, preparation is to thick, please empty, refill and restart.
Displays message:
One component of the device is too hot, please wait, device cool down and restart.
